500P退扭+對絞機的配置單

Configuration list of 500p untwist + pair winch

【產品名稱】500P退扭+對絞機

[product name] 500p back twisting + double twisting machine

【用途】

[purpose]

用于數據纜(五類、六類、七類)芯線對絞并同步退扭放線。

It is used for the data cable (class 5, class 6 and class 7) core wire pair and synchronous twisted out.

【主要參數】

[main parameters]

一)雙盤退扭機（主動放線1）

 Double disc untwister (active pay off)

1．型式 立式，雙盤裝，電動升降線盤；

1. Type: vertical, double coil, electric lifting coil;

2．最大回轉速度MAX1000RPM；

2. Maximum rotation speed MAX1000 rpm;

3．退扭率 MAX50%數顯,無級可調；

3. the torsion rate is max50% digital display, stepless adjustable;

4．放線盤（標準）Ф500（外徑）*Ф56（內孔）*300（外寬）,鎖緊保護功能;

4. Pay off reel (standard) Φ 500 (outer diameter) * Φ 56 (inner hole) * 300 (outer width), locking protection function;

5．放線電機 兩臺1HP電機,變頻器控制

5. setting out motor Two 1 HP motors, inverter control

6．張力儲線架 擺桿式雙頭，張力輪Ф120mm，位移傳感器檢出

6. The tension wire storage rack is a swing rod type double head, the tension wheel is Φ 120mm, and the displacement sensor detects it

7．張力調整 配重塊滑移式,帶刻度尺,調整方便,

7. Tension adjustment: sliding counterweight with scale, easy to adjust,

二)高速對絞機（收線自動張力2）

 High speed winch (automatic tension of winding)

1. 最大回轉速度 MAX2200RPM.無段可調;

1. Maximum rotation speed Max2200rpm. Stepless adjustable;

2. 收線軸 500mm排幅280mm;

2. Take-up shaft: 500mm, discharge width: 280mm;

3. 收線盤（標準）Ф500（外徑）*Ф56（內孔）*300（外寬）

3. Take up reel (standard) Φ 500 (outer diameter) * Φ 56 (inner hole) * 300 (outer width)

4. 絞距： 6.53 mm～36.13mm,變換齒輪式

4. Stranding distance: 6.53 mm ~ 36.13 mm, changing gear type

5. 絞向：改變引取輪繞線方式 

5. Twist direction: change the winding mode of the take-off wheel

6. 排線：Φ20mm光桿排線器排線

6. Wire arrangement: Φ 20mm smooth rod wire arranger

7. 張力控制：進口磁粉離合器+自動張力控制器

7. Tension control: imported magnetic powder clutch + automatic tension controller

8. 上下線軸：減速馬達傳動，電動升降，上下限位自動停機

8. Upper and lower shaft: reducer motor drive, electric lifting, upper and lower limit automatic stop

9. 主電機： 5.5HP,380V調速馬達9. 主電機： 5.5HP,380V調速馬達

10. 自動停機：斷線自動停機;到米數自動停機;

10. Automatic shutdown: automatic shutdown when the line is broken; automatic shutdown when the meter is reached;

【全套組成】

[complete set]

1、500P雙盤退扭機+擺桿張力架

1. 500p double disc torsion machine + swing bar tension frame

2、500P高速對絞機

2. 500p high speed twin winch

3、電器控制箱 

3. Electrical control box