機械型號: Mechanical model |
630AP絞線機/strander? |
||
機器轉數: Number of machine revolutions |
一,2500轉RPM/5000扭/分 ? |
||
絞合限度: Stranding limit |
¢0.16七根以上銅線絞合More than seven copper wires are twisted? |
||
給線徑: Feed wire diameter |
¢0.15-1.04(MM)? |
||
絞合面積: Twisting pith |
¢0.8-10平方毫米/¢ 0.8-10 square mm? |
||
絞合斷面積:Cross sectional area of strand | 0.35-6MM? |
||
絞距: Stranding distance |
11.6--99? |
||
卷曲軸:Roll crankshaft | ¢400-500-630? |
||
主軸高度: Spindle height |
850MM? |
||
主機動力:Main engine power | 11KW變頻器與馬達全銅/11kw sine frequency converter and Guangdong people motor all copper | ||
絞向: Twist direction |
自由選擇向左或向右均可You can choose left or right freely? |
||
排線裝置:Wire arrangement device | 軸承排線器,排距,排幅可任意調整/Bearing wire setter, row spacing, row width can be adjusted at will? |
||
剎車系統: Brake system |
電磁剎車外部斷線時自動剎車或磁粉離合器張力控制器由機外設定(由客戶選擇)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer)? |
||
整機軸承: Whole machine bearing |
全進口SKF軸承或日本NSK軸承/All imported SKF Bearing or Japan NSK bearing? |
||
收線張力: Take up tension |
絞線時,收線從盤底收到滿盤時收線張力需不斷增大,本機能自動跟蹤調節收線張力;使整盤收線張力均勻一致,同時本機還能不停機調節張力。When the take-up is completed, the take-up tension needs to be continuously increased when the take-up is received from the bottom of the reel. This machine can automatically track and adjust the take-up tension, so that the take-up tension of the whole reel is even and consistent. At the same time, this machine can also adjust the tension without stopping the machine.? |
||
自動停機:? Automatic shutdown |
A、機內,機外斷線自動停機;B、自動計米,到米自動停機A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached? |
||
?加油功能?:? Refueling function? | 自動定時加油,無須人工加油。Automatic timing refueling, no manual refueling.? | ||
?升降系統?:? Lifting system? | 自動升降,自動加油/Automatic lifting, automatic refueling? | ||
絞距更換?:? 引取輪更換絞距,簡單,方便? | Change of stranding distance: the change of stranding distance is simple and convenient? | ||
設計: Design |
電腦觸摸屏設計/Design of computer touch screen? |
||
噪音指數: Noise index |
約75分貝About 75 dB? |
||
機器尺寸: Machine dimensions |
L2730*W1480*H1300? |
||
凈重: Net weight |
5000KG |
630AP勐海絞線機