機械型號:Mechanical model | 500P絞線機/strander | ||
機器轉數:Number of machine revolutions | 一,2500轉RPM/5000扭/分 二,3000轉RPM/6000扭/分 | ||
絞合限度:Stranding limit | ¢ 0.08七根以上銅線絞合 ¢ 0.08 stranded more than seven copper wires | ||
給線徑:Feed wire diameter | ¢0.08-0.45 | ||
絞合面積:Twisting pith | ¢0.3-3.0平方毫米/¢ 0.3-3.0 square mm | ||
絞合斷面積:Cross sectional area of strand | 0.035-4MM | ||
絞距:Stranding distance | 4.42-39.64-100 | ||
卷曲軸:Roll crankshaft | ¢300-400-500 | ||
主軸高度:Spindle height | 750MM | ||
主機動力:Main engine power | 4KW/5.5HP變頻器與(西門子貝得或東莞馬達全銅/4kw / 5.5HP sine frequency converter and Guangdong people motor all copper | ||
絞向:Twist direction | 自由選擇向左或向右均可You can choose left or right freely | ||
排線裝置:Wire arrangement device | 軸承排線器,排距,排幅可任意調整/Bearing wire setter, row spacing, row width can be adjusted at will | ||
剎車系統:Brake system | 電磁剎車外部斷線時自動剎車或磁粉離合器張力控制器由機外設定(由客戶選擇)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer) | ||
升降系統:Lifting system | 有手動油壓或自動升降,由客戶選擇/There are manual oil pressure or automatic lifting, which are selected by customers | ||
整機軸承:Whole machine bearing | 全進口SKF軸承或日本NSK軸承/All imported SKF Bearing or Japan NSK bearing | ||
收線張力:Take up tension | 摩擦張力裝置,壓縮彈簧調整張力(或離合器自動張力收線)Friction tension device, compression spring adjusting tension (or clutch automatic tension closing) | ||
自動停機:Automatic shutdown | A、機內,機外斷線自動停機;B、自動計米,到米自動停機A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached | ||
設計:Design | 普通 或電腦觸摸屏(由客戶選擇)Normal or computer touch screen (customer's choice) | ||
噪音指數:Noise index | 約75分貝About 75 dB | ||
機器尺寸:Machine dimensions | L2650*W1295*H1200 | ||
凈重:Net weight | 1750KG |
500P圓弧推拉門南昌絞線機